Waterproof Full Body Safety Harness

Product Introduction:

Special design & high resistant polyethylene back plate for holding D-ring even after the fall.

1 pc dorsal attachment D-ring for fall arrest (EN361),with min breaking strength 25kN.

1 pc front attachment D-ring for fall arrest and rescue(EN361&EN1497),with min breaking strength 25kN.

2 Side D-ring on waist belt for work position purpose (EN358).

The center D-ring on waist for sit harness (EN813).

Comfort pad on back connected to shoulder strap.

Soft pad on waist support belt and thigh belt is made up of mesh Net for better shock absorption and comfort of the user.

Soft back support length:760mm.

Waistline adjustable from 85cm-128cm.

Adjustable shoulder strap, thigh strap and waist belt ( 5 adjustable points).

Quick release buckle on thigh strap for easy handing ,with min breaking strength 16kN.

Products Parameter:

ITEM NO.:	JE148141
DESCRIPTION OF GOODS:	Multipurpose full body safety harness
MATERIAL:	45mm high strength polyester
COLOR:	RED/BLUE(customizable)
HARDWARE:	EN361 D-RING ,METAL BUCKLE
DETAILS:	1PC dorsal attachment D-ring,1PC front attachment D-ring(EN361&EN1497),2sides D-ring on waist belt(EN358),the center D-ring on waist (EN813),with back pad and waist pad,5adjustable points(shoulder,waist,thigh),special design&high resistant polyethylene back plate,plastic clip.
BREAKING STRENGTH:	≧25KN
CERTIFICATE:	CE EN361:2002,EN1497:2007,EN358:2018,EN813:2008
APPLICATION:	CONSTRUCTION & MAINTENANCE,FREE FALL ARREST,ELEVATED WORK PLATFORM,LADDER CLIMBING,TOWER HARNESS,RESCUE,ABSEILING,WORK POSITIONING
PACKING:	5PCS/CTN,G.W.:14KGS,N.W.:13KGS,55*25*34CM

Precautions

■Any product exhibiting deformities, unusual wear, or deterioration must be immediately discarded. Any equipment subject to a fall must be removed from service. The authorized person/ user shall have a rescue plan and the means at hand to implement it when using this equipment.

■Never use fall protection equipment for purposes other than those for which it was designed. Fall protection equipment should never be used for towing or hoisting.

■All synthetic material must be protected from slag, hot sparks, open flames, or other heat sources.

The use of heat resistant materials is recommended in these applications.

■Never use natural materials (manila, cotton, etc.) as part of a fall protection system.

■Do not exposing the equipment to chemicals, heat, flames or other environmental conditions, which may produce a harmful effect and to consult the manufacturer in case of doubt. If you are uncertain about the safe operation of this equipment in any environment, contact JECH for further instructions.

Donning the harness

Step-1 : Holding the shoulder straps, put on the harness like a vest.	Step-2 : Open the leg loop buckles and carabiner
Step-3 : Sput on the leg staps Connect the leg buckles Fasten the leg straps.	Step-4 : Connect the carabiner with webbing eyes on chest and wais
Step-5 : Adjust the shoulder strap and fasten the chest strap,waist strap Fasten the leg straps	Step-6 : Roll the redundant webbings on elastic belt
Step-7 : Ensure straps are not twisted.The loose end of webbing is for adjustment and must always be located on the outside (away from the user)	Step-8 : Pass the buckles with the center bar under the square link. Turn the center bar buckle so that the edges line up with the slots in the square link. Pull the center bar buckle completely through the square link and allow it to fall into place on top of the square link..

Workshop

Certificate

OUR SERVICES & STRENGTH

QUALITY: Stable quality outgoing, and the experience in fall protection industries for years;

SERVICE: Great ability of research and development, manufacturing control, customization, and cooperation;

COST: Minimize your purchasing cost, time cost, energy cost, quality-out-of-control cost and such invisible cost.

FAQ

Q1. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q2. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.

Q3: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

http://www.jechsafe.com/